When you want to make cabinets, you are usually short of hands.
You have to hold two boards, put the screw in the right position, and also operate your drill.
That’s why I made these corner clamps.
They are easily adjustable, easy to use for any thickness of wood, and I always have my hands free.
Looking for more corner clamp ideas?
Be sure to check out the type of angle clamp that I recently made.
Free plans are also available for these clamps.
With these corner clamps, it’s as easy as that.
Just set the thickness of the sheets you want to connect, place the sheets in the right position, clamp, and you can connect them together.
You don’t have to hold the sheets anymore and the connection is always perfect.
When the connection is made you can remove the clamps in a few seconds.
Watch the video here
Before we build these corner clamps
To prepare you for building this project, I have made a few handy lists.
In addition to a few personal protective equipment that I use*, I also list the materials as well as the (power) tools you will need to build this jig.
* Safety is always your own responsibility!
Materials I used for this Corner clamp
(power)Tools I used for this Corner clamp
- Makita MLT100 table saw Watch my Unboxing video and my review video if you want to see more about this tool.
- Makita 3709 router
- Makita AF505N Brad nailer. Watch my Unboxing video if you want to know more about this tool.
- Brad nails 25mm
- Air compressor
- Drill press
- Miter saw
- Kreg KMA multi mark and measuring tool
- Pica pencil to mark all the pieces.
Building these Corner clamps step by step
Now that we have gone through the list of what we all need for this project, I will explain step by step how I made these corner clamps.
Collect your materials and find the best wood.
Let’s build this clamp!
Step 1 | Preparation
Saw all parts as indicated on the plans that you can download in this blog.
To cut the pieces safely and quickly I used my crosscut sled. Be sure to watch the video of how I made my crosscut sled to get some inspiration.
Step 2 | Making a slot
To keep the wedges in place I made a slot in the base of the corner clamps.
To make the slot, adjust the height of the saw blade to the depth you want to make the slot.
With the crosscut sled, you can easily slide the base plate over the saw blade to make a flat slot.
Afterward, you can finish the slot with the chisel and sandpaper if necessary.
Step 3 | Placing the center bolt
To be able to move the adjustable part up and down and to fix it, you can use a bolt that is fixed on the bottom plate.
Later in this blog, I will show you how to make the button to fix the movable part when adjusting the clamp.
Drill a hole at the specified distance as on the plans. Use a drill with a diameter equal to the diameter of the bolt.
After drilling, make the hole at the bottom of plate larger so that the head of the bolt fits perfectly.
Do this by marking the head of the bolt with a pencil and carefully chisel out the hole.
Step 4 | Adjustable part
Now you can make the adjustable part of this clamp.
First, drill the holes at the indicated points as shown on the plan.
After drilling the holes, cut the slot with the jigsaw by cutting from one drill hole to the other.
After cutting, trim the slot with a file so that it has the same width everywhere.
Step 5 | Wedges
Now make the wedges.
I made these wedges by combining my miter saw with my crosscut sled. That way I didn’t have to reset the angle of the miter saw all the time.
Check the plans for the correct size of the wedges.
You can now use the wedges as pairs on the clamp. The wedge that is flush with the outer edge of the corner clamps needs to be secured with wood glue and brad nails.
If you do not have a nailgun, you can use regular nails for this.
Look carefully in which direction you should place the wedges. If these are not placed correctly, you may experience difficulties when working with the corner clamps.
Step 6 | Securing the wedges
To prevent the wedges from falling out of the corner clamps, especially when you use the corner clamps upside down, you will need to attach a cover plate above the wedges.
For this, you can use 6mm thick plywood. Secure this plywood with wood glue and brad nails.
Step 7 | Making a knob
To fix the adjustable plate when setting it up, you can use a regular nut or a knob that you can buy ready-made.
Because I built a star button jig on my drill press a while ago, I made this knob myself.
To be able to screw the knob onto the bolt, I placed a T-nut in the knob by gently pressing it into the knob with the vice.
Step 8 | Assembling the Corner clamps
The clamp is now ready.
All you have to do is slide the wedges into place and turn the knob on the bolt.
To make all edges nicely flush, I placed the clamp on the crosscut sled and slid it along the saw blade. That way I got a nicely finished clamp.
Do you find this blog interesting?
Don’t miss a single blog with free plans or tips & tricks in the future! Subscribe to my newsletter and be the first to be notified when I post new content on my website.
How to use these Corner clamps
Working with these corner clamps is super easy.
Set the adjustable piece according to the thickness of the wood. Because I usually use 18mm wood I marked a line at this size.
Place the wooden boards you want to connect in the clamp.
Clamp the boards by tightening the wedges.
Build your workshop on a budget
Download the free e-book
You can spend your budget only once
Building a workshop can be tough and involves a lot of trial and error.
I know because I was there too. Thanks to this training, I gained better insights into building a workshop so that I could spend my budget more efficiently.
With the free E-Book 7 Deadly Mistakes Woodworkers Make When Setting Up a Shop, you’ll get a glimpse of what to expect from this training in addition to the 7 tips.
Highly recommended to all my fellow DIYers and makers.
Limited beat the lockdown price: $39
I want to hear from you!
Do you have an addition to this blog or an upbuilding comment?
Feel free to let me know in a comment below.
Contribute to our community and share your experience and knowledge with others so that we can all learn from each other.
Read more blogs in this category. Visit the list through this button:
I hope this information was helpful and that this blog and video inspires you. Let me know in a comment below.
Feel free to share this blog on Facebook, Pinterest or other social media. You can do this by using the buttons below or at the top of the blog. I would appreciate that.
Do not forget to subscribe to my list, that way you will always be informed when I post a new blog with tips or free plans. You can subscribe by filling in the “let’s stay in touch” form.
I’m looking forward to see you soon in another blog or video.
Woodworking | DIY | Home decoration
Download the free plans here
Enter your name and email address here and receive the plans immediately in your mailbox
Get access to the 3D model file
A 3D design helps you to understand a project better, that is why I offer you these files for FREE when you become a member.
That is one of the advantages of being a member, check more about it by clicking the button below.